Special Tripods | GLUNZ Technik

Tripod G1N
No.: 11113000

with tilting head, inclination +/- 35°

Scanner-Tripod G3MSV
No.: 21169300

Aluminiumtripod extra heavy, stable and free of vibrations for Laserscanner. With double clamps, strut, sliding tube for height adjustments and big instrument-plate. Length: 1,75 m – 3,00 m

Scanner-Tripod G3MSV
No.: 21169400

Aluminiumtripod extra heavy, stable and free of vibrations for Laserscanner. With double clamps, strut, sliding tube for height adjustments and big instrument-plate. Length: 2,20 m – 4,00 m

Aerial Tripd G1A 3,00 m
No.: 21086300

Large metal tripods for GPS-measurements with self-levelling thread 5/8". The tribrach is automatically centered by using the pole and adjusting the bubble. Because of the ball-type-head it is levelled and fixed. Length: 1,65 m – 3,00 m

Aerial Tripd G1A 4,00 m
No.: 21086400

Large metal tripods for GPS-measurements with self-levelling thread 5/8". The tribrach is automatically centered by using the pole and adjusting the bubble. Because of the ball-type-head it is levelled and fixed. Length: 2,15 m – 4,00 m

Aerial Tripd G1A 5,00 m
No.: 21086500

Large metal tripods for GPS-measurements with self-levelling thread 5/8". The tribrach is automatically centered by using the pole and adjusting the bubble. Because of the ball-type-head it is levelled and fixed. Length: 2,65 m – 5,00 m

Aerial Tripd G3A 3,00 m
No.: 21087300

Large metal and extra heavy tripod Length: 1,65 m – 3,00 m

Aerial Tripd G3A 4,00 m
No.: 21087400

Large metal and extra heavy tripod Length: 2,15 m – 4,00 m

Aerial Tripd G3A 5,00 m
No.: 21087500

Large metal and extra heavy tripod Length: 2,65 m – 5,00 m

Wooden Tripod G3Z
No.: 21086000

The tripod G3Z forms with ball-type head and centering pole a centering unit, that allows an easy and fast levelling of the instruments. Centering pole with scale and bubble. Complete with centering unit

Aluminium Tripod G3Z
No.: 21087000

The tripod G3Z forms with ball-type head and centering pole a centering unit, that allows an easy and fast levelling of the instruments. Centering pole with scale and bubble. complete with centering unit

Stand for Pillars
No.: 23950000

Very heavy stand, with a big centering area. Each leg with point. Head-diameter: 160 mm Height: 160 mm Weight: 2,50 kg

Stand for Pillars
No.: 23951000

Stand for pillars with adjustable legs, to level the instrument plate

Stand for Pillars
No.: 23952000

Levelling inset with centering point to fit into the center-screw

Clamp for Scaffolds K1
No.: 23953150

Small univeral holder for scaffolds, with notch for nails Size: 100 x 90 x 150 mm

Clamp for Scaffolds K2
No.: 23953000

for boards, planks and scaffolds, plastic coated in signal-orange. To set up and align levels, theodolites and lasers. Perfect shaped notch, stainless screws and strong clamping-plates for a professional usage. Size: 140 x 140 x 120 mm Weight: 2,00 kg

Scaffold Clamp Holder K3
No.: 23953350

with different nail-offset for vertical working laserlevels. Offset as wished

Magnetic-Plate
No.: 21607500

Anodized thick aluminiumplate with 3 strong magnets. Adaptor for instruments as desired: Thread 5/8" or Wild/Leica-bolt Diameter: 110 mm Weight: 0,70 kg

Suspension Tripod HS15
No.: 21170000

Can be moved and turned in height, direction and gradiation. Instrument can be moved on the plate. To be drilled or attached with a clamp on pillars, lintels and constructions.

Bracket
No.: 21169000

as a very stable fixture for heavy instruments. Can be drilled or attached with a belt on pillars, lintels, constructions and corners. Instruments can be moved on the plate.

Cross Table
No.: 23954000

Adjustable for exact alignments into two directions. Free view to the ground. Can be attached on tripods, Supports and pillars. Innerthread: 5/8” Size: 200 x 200 mm Height: 75 mm Movement X: 136 mm Movement Y: 74 mm Division steps: 0,05 mm Weight: 3,50 kg